Espressivo pedal sensor with mounting bracket

Espressivo pedal sensor with mounting bracket

SKU: 001104
GTIN: 4260749511007
Category: Keyboard
Manufacturers: Orgelpunkt

Prices visible after login

Currently out of stock
Delivery time: 3 - 4 Workdays (Other countries)

Pcs.

Description

The Espressivo single sensors were developed primarily for the pedal keyboard, but can also be used at other locations of the tracker action. They are designed to be mounted on the side of the pedal squares. The corresponding magnet 4mm x 12mm is glued into a hole in the square and moves laterally along the sensor.

The movement of the sensor magnet can be detected over a maximum travel of 10mm. Due to the usual lever ratios at pedal squares, there is a stroke of +/- 15mm at the tip of the pedal keys.

The sensors of a pedal keyboard are connected to each other with a prefabricated ribbon cable. The bus adapter is used to power the pedal sensors and convert the data lines to the standard RJ45 bus connector (Ethernet), which is used to connect to the Espressivo master.

All functions known from the Espressivo manuals (setting of -pretravel, switch point spread, etc.) and the detection of the key speed for velocity-sensitive playing or dynamic coupling are also available for the pedal.