Espressivo key magnet with countersunk hole pack 8mm x 2mm - PU 180pcs.

Espressivo key magnet with countersunk hole pack 8mm x 2mm - PU 180pcs.

SKU: 001127
Category: Keyboard
Manufacturers: Orgelpunkt

180 pieces/PU

Prices visible after login

Available immediately
Delivery time: 3 - 4 Workdays (DE - int. shipments may differ)

Pcs.

Description

The alternative method of mounting keyboard magnets for the Espressivo system.

The contact-less Espressivo system detects key movement using magnetic field sensors and key magnets. These magnets are usually glued into matching blind holes. For this purpose we have special glue and a magnet mounting tool in our program.

When retrofitting older keyboards, the precise drilling of holes can be problematic. It requires complete disassembly of the keys, and some organ builders distrust the long-term stability of the adhesive bond between wood and metal.

With this in mind, we have developed this special magnet with a countersunk hole. It is simply screwed onto the key. We also have a special screw made of barely magnetic stainless steel, as well as the ideally matching Philips bit size PH00 with an extended shaft.

Despite the tiny screw size, the drive system is so robust that it is sufficient to pierce a hole with a scriber to drive in the screw. Retrofitting existing keyboards is easier than ever with the new magnet system, and the interference with potentially historic substance is less than with any other contact system.

Just like the standard magnets, the countersunk magnets have a dimension of 8mmx2mm. Here, too, the key travel at the magnet site should be between 2mm-4mm. The minimum distance to the sensor board has been reduced from 1.5mm to 0.5-0.7mm (simple thickness of a credit card). The space required for installation under the manual is thus only increased by about 1.5mm compared to the recessed adhesive mounting.

Shipping weight:	0.14 kg
Item weight:	0.14 kg