Espressivo DI module

SKU: 001114
GTIN: 4260749511083
Category: Console
Manufacturers: Orgelpunkt

Prices visible after login

Available immediately
Delivery time: 3 - 4 Workdays (Other countries)

Pcs.

Description

With the DI module, classic electrical contacts can also be integrated into the Espressivo system. For example, when converting manuals to Espressivo sensors, the existing pedal contact assembly can be retained. DI modules are connected to the Espressivo master module like keyboard sensors. All signals are transmitted together in the same data format on the interfaces of the master module.

If the pallet valves of the action are controlled with Espressivo windchest modules, the DI module is used to transmit information from the stop switches. Just as with manual keys, switching on and off stops triggers MIDI messages. These signals control the freely configurable assignment of keys to pallet outputs.

The 64 inputs of the DI module can be configured for different purposes. Either all inputs are used to capture a keyboard or stop switches on adjustable MIDI channels. Or 32 inputs are used for the integration of a pedal keyboard while 32 inputs connect to stops or coupler switches.

In addition, potentiometers or other analogue sensors for swell shoes can be connected via the three analogue headphone-jack-type input sockets. At the push of a button, the electronics adjust to the minimum and maximum values of the shoe positions and convert the movement of the swell shoes with a resolution of 128 steps as a MIDI controller message. This data can be used to control external electronic sound generators or to drive swell shades connected to a compatible organ control system via the existing network connection of the key action.

You can also connect the swell shade control units made by Orgelpunkt directly via network cable to complement existing electric actions.

Note:

To connect DI modules, the Espressivo master module needs to run on firmware version 4.4 or higher (see sticker on upper edge of the master housing).

If you intend to add DI modules to older Espressivo installation, please contact us in advance to organise a firmware upgrade of the master module.